Beal Jammy 50cm sewn prusik
SKU: BLJ.50
Beal Jammy 50cm sewn prusik
5.5 mm sewn rope sling made with an aramid core and polyamide sheath. When configured as a prusik it can be used with single or half rope, on one or both half ropes. Aramid/Polyamid.
KEY FEATURE:
- Very high resistance, even in case of important warming up.
- Very supple in order to grip even small diameter ropes.
- Sewing protected by a heat shrunk sleeve.
- Very high resistance to repeated folding thanks to Technora aramid.
- Unmatched lightness compared to mechanical systems.
USES:
- To create a prusik knot for increased security during a rope descent.
- To create a rope clamp for quick hauling.
- Recommended knot: Machard and braided Machard (depending on the use).
WARNING!!!
Before use, the Prusik efficiency must be checked by the climber with its own rope. It may be necessary to make an extra turn, for example when using a new rope.
Customers also bought
Petzl Micro TraxionUltra-light pulley with rope clamp function with switchable backstop for crevasse rescues, hoisting operations and self-rescue techniques. Can be used as an emergency ascender. Sealed Ball Bearings. Rope: 8 - 11mm.
€ 90,00 € 82,95
le Neuf (9spirit) / The NineSelf-locking safety device for use on single rope, dynamic UIAA rope from 9.1 mm to 11 mm. Use with HMS pear-shaped carabiner, D-shaped carabiners prohibited (unwanted pinching of the rope).
€ 39,90Back in stock
Sterling ATS greenMulti-use belay and descender for both rock climbing and canyoning. Suitable for the need for different friction settings. For use on rope diameters from 7.5 to 11.2mm. Colour green.
€ 54,95
CanyonWerks CRITR3Many options allow for careful adjustment of friction while rappelling. Symmetry allows flipping, which extends life. Many options have made this a popular rappel device. For persons with weight greater than (>170 lbs = 77 kg).
€ 59,95 € 54,95
